jdavid10 Posted September 6, 2013 Share Posted September 6, 2013 (edited) Hello everyone, I'm writing because I need to disable the dynamic input in AutoCAD. It's irritating to me, because I'm more used to a much older version of AutoCAD. I just found this forum while searching through the internet and this is my first post here. Upon searching through the internet I found a thread here that says that I have to set DYNMODE to "0" to turn off the dynamic input. Alas, I have no clue as to at which subfolder of the registry this variable should be. Could anyone help please? Thank you all for your time. Edited September 8, 2013 by jdavid10 grammar error Quote Link to comment Share on other sites More sharing options...
steven-g Posted September 6, 2013 Share Posted September 6, 2013 Just type "dynmode" on the keyboard Autocad will tell you what value it now is, and ask you for a new value, just type "0" Quote Link to comment Share on other sites More sharing options...
tzframpton Posted September 6, 2013 Share Posted September 6, 2013 Or, use the toggle icon towards the bottom of the interface, along the strip of toggles and draft settings: http://exchange.autodesk.com/autocad/enu/online-help/search#WS1a9193826455f5ffa23ce210c4a30acaf-7173.htm Welcome to the forum. Quote Link to comment Share on other sites More sharing options...
Dadgad Posted September 7, 2013 Share Posted September 7, 2013 Welcome to CADTutor. And just for good measure you can also toggle DYNAMIC INPUT on and off with the F6 key. Quote Link to comment Share on other sites More sharing options...
ReMark Posted September 7, 2013 Share Posted September 7, 2013 Many settings in AutoCAD are controlled by system variables that can be reset from within AutoCAD itself at the command line. There should never come a time when a user has to resort to editing the Windows Registry directly. Quote Link to comment Share on other sites More sharing options...
Dadgad Posted September 7, 2013 Share Posted September 7, 2013 In the future you might try entering SYSVDLG at the commandline, which will take you to a very comprehensive list of system variables, and descriptions of the various options which can be set for your SYSTEM VARIABLES, of which DYNMODE is but one. We forum members are more than happy to help, should you need help, so don't hesitate to ask. Quote Link to comment Share on other sites More sharing options...
jdavid10 Posted September 8, 2013 Author Share Posted September 8, 2013 Just type "dynmode" on the keyboard Autocad will tell you what value it now is, and ask you for a new value, just type "0" Hi Thanks steve for the quick reply. I didn't know about that. However, I'm still curious though. Could it be done through the registry too? If so, then at which folder would the variable "DYNMODE" be? Quote Link to comment Share on other sites More sharing options...
jdavid10 Posted September 8, 2013 Author Share Posted September 8, 2013 Or, use the toggle icon towards the bottom of the interface, along the strip of toggles and draft settings:http://exchange.autodesk.com/autocad/enu/online-help/search#WS1a9193826455f5ffa23ce210c4a30acaf-7173.htm Welcome to the forum. Hi, thank you tzframpton Quote Link to comment Share on other sites More sharing options...
jdavid10 Posted September 8, 2013 Author Share Posted September 8, 2013 In the future you might try entering SYSVDLG at the commandline, which will take you toa very comprehensive list of system variables, and descriptions of the various options which can be set for your SYSTEM VARIABLES, of which DYNMODE is but one. We forum members are more than happy to help, should you need help, so don't hesitate to ask. Very interesting! Thank you for that information. Even though I learned AutoCAD so long ago, sometimes I feel like I'm getting started all over again. The new versions are so different from the 2002 version with which I learned at the University. Quote Link to comment Share on other sites More sharing options...
Dadgad Posted September 8, 2013 Share Posted September 8, 2013 HiThanks steve for the quick reply. I didn't know about that. However, I'm still curious though. Could it be done through the registry too? If so, then at which folder would the variable "DYNMODE" be? While curiosity is a good thing, given that there are numerous easier and safer ways to set this option than messing around in the registry, I should think that one of them would be preferable. Yes, no doubt it could be done in the registry too, but it wouldn't be as easy or quick as clicking on the icon, entering a new value at the commandline, or hitting F6. When you have some free time, look around in the SYSVDLG (system variables dialog), you will learn plenty. Likely many behaviors which you seem inclined to want to change in the registry can be done there in a matter of seconds, including researching all available options. Quote Link to comment Share on other sites More sharing options...
jdavid10 Posted September 8, 2013 Author Share Posted September 8, 2013 Very well Dadgad Perhaps it's not safe to mess around with the registry. I'll keep your advice then. Quote Link to comment Share on other sites More sharing options...
jdavid10 Posted September 16, 2013 Author Share Posted September 16, 2013 Many settings in AutoCAD are controlled by system variables that can be reset from within AutoCAD itself at the command line. There should never come a time when a user has to resort to editing the Windows Registry directly. Thank you ReMark, you're right. Perhaps it's better not to mess around with the registry. I'll keep your advice then. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.