Search the Community
Showing results for tags 'deed'.
rodjos1000 posted a topic in AutoCAD 2D Drafting, Object Properties & InterfaceHello All, Having a hard time figuring best way to plot this deed. The many radiii are throwing me off and I end up with a triangle. Any help or tutorial would be greatly appreciated. Just need to unlock the first steps. I have done simple plans before, but this one is above my expertise. Here is the deed description: BEGINNING at a point on the Southeast side of James Road (50 feet wide) which point is measured on the arc of a circle curving to the left having a radius of 150 feet the arc distance of 91 feet 7 1/8 inches from a point is measured North 38 degrees 23 minutes 12 seconds East 538 feet from a point; which point is measured on the arc of a circle curving to the right having a radius of 20 feet the arc distance of 31 feet 5 inches from a point on the Northeast side of Thomas Avenue (64 feet wide) thence extending along the Southeast side of James Road along the arc of a circle curving to the left having a radius of 150 feet the arc distance of 72 feet 4 7/8 inches to a point on the Northeast side of James Road thence extending North 65 degrees 44 minutes 35 seconds East 128 feet 5 3/4 inches to a point, thence extending South 50 degrees 25 minutes 8 seconds East 218 feet 11 7/8 inches to a point, thence extending North 36 degrees 35 minutes 53 seconds West 273 feet 5 inches to a point on the Southeast side of James Road, the first mentioned point and place of beginning. Thanks. John