Search the Community

Good evening all, I am trying to make an iPart using iLogic rules and I'm stuck. The part (put simply) is a solid box with a rectangular hole running right through it, slightly off centre. My sketch includes an 'X' dimension (which is also d3 and d4), that I would like to be determined by what I input as 'ApertureWidth' and 'ApertureHeight' Below is what I have written as an iLogic rule, however the 'X' dimension is not behaving as I like ie it is always 125mm. This is my first attempt at iLogic so I'm sure it's something simple but I can't see it. Any help appreciated If ApertureHeight=100 AndAlso ApertureHeight If ApertureHeight=275 AndAlso ApertureHeight If ApertureHeight=1025 AndAlso ApertureHeight If ApertureHeight=1525 AndAlso ApertureHeight If ApertureHeight=2025 AndAlso ApertureHeight If ApertureHeight=2525 AndAlso ApertureHeight If ApertureHeight>=75 And ApertureWidth>=100 AndAlso ApertureHeight If ApertureHeight>=75 And ApertureWidth>=275 AndAlso ApertureHeight If ApertureHeight>=75 And ApertureWidth>=1025 AndAlso ApertureHeight If ApertureHeight>=75 And ApertureWidth>=1525 AndAlso ApertureHeight If ApertureHeight>=75 And ApertureWidth>=2025 AndAlso ApertureHeight If ApertureHeight>=75 And ApertureWidth>=2525 AndAlso ApertureHeight