PS_Port Posted June 28, 2009 Share Posted June 28, 2009 I've just had a look at the file you posted.. I get the same results as you , +-15'. DIMSTYLE will not fix your problem... there are no styles attached.. In fact whoever gave you that drawing went out of their way to make it non-user friendly. - Dimensions have been exploded - Hatches have been exploded - No layers - Everything has been purged, and put on Layer 0 - And the real kicker , the drawing has been scaled. Firstly I would scale the drawing back to 1:1, find a line of known length (real world), LIST it, use these different numbers to get a scale factor. Be carefule using stated dims, as these may be rounded or even overridden. Then create a dimstyle that matches the one you want, you might also have to create a textstyle to use in the dimstyle, as there are none on that drawing... Good luck. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.