Stanier Posted March 9, 2010 Share Posted March 9, 2010 Hello - Using Autocad 2000, I wish to use the Draw/Point/Measure/Insert Block/Interval command to insert a line of holes as defined by the block at the specified interval but at the end of the command sequence the line of holes is appearing away from the given line. Strange because I have used this command sequence before in other drawings with the desired results but for some reason it is not behaving as expected in the current drawing. Can someone please explain what the problem might be. Many thanks Quote Link to comment Share on other sites More sharing options...
lpseifert Posted March 9, 2010 Share Posted March 9, 2010 It would be easier to troubleshoot if you could post the trouble dwg, or a portion of it. Quote Link to comment Share on other sites More sharing options...
CarlB Posted March 9, 2010 Share Posted March 9, 2010 Is there anything unusual about the drawing- extremely large coordinates? Created by another program initially? Quote Link to comment Share on other sites More sharing options...
Stanier Posted March 9, 2010 Author Share Posted March 9, 2010 Nothing unusual about the coordinates. Drawn object is in imperial units hving dimensions typically 6" by 62. As a further piece of infomation. Using the similiar Draw/Point/Divide/Num of divisions sequence in the same drawing works exactly as expected. Incidently, the displaced line of holes in the Measure sequence is being place some 3ins off target if that is of any assistance. Thank you for your time. Quote Link to comment Share on other sites More sharing options...
CarlB Posted March 9, 2010 Share Posted March 9, 2010 Check that the insert point of the block is really what you think it is ,since it's the insert point that is placed along the object. Quote Link to comment Share on other sites More sharing options...
rkent Posted March 9, 2010 Share Posted March 9, 2010 Check that the insert point of the block is really what you think it is ,since it's the insert point that is placed along the object. I would agree with CarlB, use the insert command and see if the block is centered on your cursor or if it is offset. If offset then that is the problem and you will have to fix the block. Quote Link to comment Share on other sites More sharing options...
Stanier Posted March 10, 2010 Author Share Posted March 10, 2010 Hi - Your analysis is correct. The block insertion point is not centred on the cursor but how do I draw the block to ensure that it is? Thanks again Quote Link to comment Share on other sites More sharing options...
Fire_col Posted March 10, 2010 Share Posted March 10, 2010 In block editor you can re-define the base point. Quote Link to comment Share on other sites More sharing options...
Stanier Posted March 10, 2010 Author Share Posted March 10, 2010 Hi - I am sorry to flog this but I cannot work out how to redefine the base point to co incide with the cursor. The block editor displays the option to 'Pick Point' with the three boxes for X, Y and Z but what data should I be entering? Quote Link to comment Share on other sites More sharing options...
Fire_col Posted March 10, 2010 Share Posted March 10, 2010 Click on pick point then it'll ask you to choose on the drawing where you want the base point to be, you don't need to enter anything just click with the cursor and that's it your basepoint is selected. Quote Link to comment Share on other sites More sharing options...
Stanier Posted March 10, 2010 Author Share Posted March 10, 2010 Hi - Thank you for your reply. I think that I may have a currupt file because I have followed your instructions and on trying to re- insert the block, it is still being place some way off the cursor. Any suggestions as to what I should try next? Quote Link to comment Share on other sites More sharing options...
Fire_col Posted March 10, 2010 Share Posted March 10, 2010 Can you upload your drawing and I'll take a look? Quote Link to comment Share on other sites More sharing options...
Stanier Posted March 10, 2010 Author Share Posted March 10, 2010 Yes, sure but how do I upload the drawing ? Quote Link to comment Share on other sites More sharing options...
Fire_col Posted March 10, 2010 Share Posted March 10, 2010 Use the advanced reply option on this forum and there is an option for attach just like in an e-mail. When the attach file dialogue comes up choose browse where it says upload from your computer, and choose the problem drawing then hit attach when it's attched just hit post reply then I'll have a look at it for you. Quote Link to comment Share on other sites More sharing options...
Stanier Posted March 10, 2010 Author Share Posted March 10, 2010 Hi - Drawing attached. I am trying to place the block named 3-64 rivet. Cab Side.dwg Quote Link to comment Share on other sites More sharing options...
Fire_col Posted March 10, 2010 Share Posted March 10, 2010 Right I've managed to do it. Insert your block, select it once inserted, right click and choose block editor on the menu. When the editor opens up type the command 'bparameter' then enter b, for base, then choose where you want the base point to be. then close the block editor, a dialogue box will come up telling you that you've changed something and do you want to save, click yes. Now when you insert your block it will have the base point desired. Quote Link to comment Share on other sites More sharing options...
Stanier Posted March 10, 2010 Author Share Posted March 10, 2010 Thank you for your reply but I am running AutoCad 2000 and I do not appear to have the right click option for 'block editor' available and the command line does not recognise the command 'bparameter'. I will not be around for the next couple of hours to read your replies but will come back on line this afternoon. Will look forward to picking up the thread. Thanks again. Quote Link to comment Share on other sites More sharing options...
Fire_col Posted March 10, 2010 Share Posted March 10, 2010 Ok just type bedit, and then choose your block and it will open the block editor for that block. Then run the bparameter command. Quote Link to comment Share on other sites More sharing options...
eldon Posted March 10, 2010 Share Posted March 10, 2010 Right I've managed to do it. Insert your block, select it once inserted, right click and choose block editor on the menu. When the editor opens up type the command 'bparameter' then enter b, for base, then choose where you want the base point to be. then close the block editor, a dialogue box will come up telling you that you've changed something and do you want to save, click yes. Now when you insert your block it will have the base point desired. I am afraid that you are describing a technique that was not available in the days of r2000. I have done it in another way that is available. First insert the block "3-64 Rivet" anywhere in the drawing. Find it because it is 5+" from the insertion point, and explode it. Then go to Draw, Block, Make. Enter in the same name "3-64 rivet", then for the Base point use the Pick point button and choose the centre of the circle. Then click on OK at the bottom, then a box comes up saying that the block is already defined. Do you want to re-define it? Click on the Yes, and that is it. Quote Link to comment Share on other sites More sharing options...
Fire_col Posted March 10, 2010 Share Posted March 10, 2010 I am afraid that you are describing a technique that was not available in the days of r2000. Sorry I'm not too familiar with 2000, your method was going to be my next port of call, if mine had failed, which I now know it ultimately would have . Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.