Jump to content
khoshravan

Arc (start-2nd-end point) absolute or relative coordinates

Recommended Posts

khoshravan

I have a problem with absolute and relative coordinate regarding drawing an arc.

 

From my previous studies, I thought whenever I input coordinates in command line, in order to use absolute coordinates I just enter them. If I want to use relative coord, then I can prefix them with @ sign.

 

For an arc I input as follows: start point: 0,0 2nd point: 500,500 end point: 1000,0. I was expecting to get a half circle from origin to 1000,0 point but to my surprise I find out that CAD gets the input coordinates as relative.

 

Am I missing something? 1.jpg

Is this behavior same for all other object drawings?

1.dwg

Share this post


Link to post
Share on other sites
nestly

Dynamic Input turned ON = Black

Dynamic Input turned OFF = Red

Why? .... because the default (OOTB) setting for Dynamic input is "Relative Coordinates" so it automatically adds the @ symbol.

 

If you want to change the default settings, do it through DSETTINGS or use the # symbol to specify Absolute coordinates.

DSettings.jpg

Share this post


Link to post
Share on other sites
khoshravan

Dear Nestly

 

Thanks a lot. Like as always your reply is perfect. I have to admit that I was unaware of this point.

AutoCad is such a great and detailed program that has commands for every single point.

This Forum is really a good place to learn and enhance knowledge about AutoCAD.

 

Just one minor point. You mentioned:

 

Dynamic Input turned ON = Black

Dynamic Input turned OFF = Red

 

I didn't get the point where are you referring to? In your posted image I couldn't find your quotes. But my problem is resolved.

Edited by khoshravan
add note

Share this post


Link to post
Share on other sites
nestly

"Red" and "Black" refer to the colors of the arcs in your screenshot.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...