allah Posted May 18, 2012 Share Posted May 18, 2012 Hello, Can someone share with me an file compatible with autocad 2004 that has a rim section in autocad? Like this: http://www.mgexperience.net/article/images/wheel_dims.gif But I need it in autocad. Or maybe can someone very nice make it for me? It will take you guys just a couple of minutes. I have the diameter of the rim 17", and the rim width 255mm. That's all the particular lenghts that needs to be in my rim section. Thank you very much! Quote Link to comment Share on other sites More sharing options...
ReMark Posted May 18, 2012 Share Posted May 18, 2012 Looks fairly straightforward to me. Why don't you give it a try. If you run into a problem post a question and we'll do our best to assist you. There have been a handful of threads here about this topic (search for rim, wheel or tires) that you may wish to take a look at. Quote Link to comment Share on other sites More sharing options...
allah Posted May 18, 2012 Author Share Posted May 18, 2012 I don't know nothing about AutoCad, and I need just this one. That's why I am seeking someones help. Quote Link to comment Share on other sites More sharing options...
ReMark Posted May 18, 2012 Share Posted May 18, 2012 Well isn't it time you learned? What's the sense of having AutoCAD in the first place then? Did you find and look at some of the other threads? Quote Link to comment Share on other sites More sharing options...
allah Posted May 18, 2012 Author Share Posted May 18, 2012 I need it for an demand that is was made to me, something like an homework. I've searched but I found espacially rims in 3d. I need just an simple 2d rim section. Thanks. Quote Link to comment Share on other sites More sharing options...
ReMark Posted May 18, 2012 Share Posted May 18, 2012 If it is just a simple rim section you need how tough can that be to create? A few lines and arcs and you're done. At least try. Quote Link to comment Share on other sites More sharing options...
ReMark Posted May 18, 2012 Share Posted May 18, 2012 Would something like this do? Caveat: It is a very rough drawing created by tracing over an image using the polyline command. I did not bother to even do any curve fitting. Limited time offer. Take it or leave it. I'll give you 15 minutes to respond from the time this is posted. The clock starts now. GO! Quote Link to comment Share on other sites More sharing options...
allah Posted May 18, 2012 Author Share Posted May 18, 2012 Thanks, but how can I download it? I see only the image, not the autocad file. Quote Link to comment Share on other sites More sharing options...
rkmcswain Posted May 18, 2012 Share Posted May 18, 2012 (edited) Maybe this will help. Unzip both files to the same location. WHEEL2.zip Edited May 18, 2012 by rkmcswain Quote Link to comment Share on other sites More sharing options...
allah Posted May 18, 2012 Author Share Posted May 18, 2012 What both files? I see only wheel.zip And if I unzip it, it gives an error (could not open this archive). Thanks. Quote Link to comment Share on other sites More sharing options...
ReMark Posted May 18, 2012 Share Posted May 18, 2012 I see rkm has posted a zip file so there is no need for me to do so. You should still try your hand at learning AutoCAD...someday. Quote Link to comment Share on other sites More sharing options...
ReMark Posted May 18, 2012 Share Posted May 18, 2012 Maybe I spoke too soon. OK...try this one. Saved in AutoCAD 2000 DWG file format. 2D_Rim.dwg Quote Link to comment Share on other sites More sharing options...
allah Posted May 18, 2012 Author Share Posted May 18, 2012 The zip file that rkm posted doesn't work Quote Link to comment Share on other sites More sharing options...
allah Posted May 18, 2012 Author Share Posted May 18, 2012 Yes it works, thank you very much! Quote Link to comment Share on other sites More sharing options...
ReMark Posted May 18, 2012 Share Posted May 18, 2012 That's good to hear. You're entirely welcomed. Quote Link to comment Share on other sites More sharing options...
rkmcswain Posted May 18, 2012 Share Posted May 18, 2012 The zip file that rkm posted doesn't work I updated the ZIP file. Quote Link to comment Share on other sites More sharing options...
allah Posted May 19, 2012 Author Share Posted May 19, 2012 Rkm, it works now, but at the one from yours I see only an box in the wheel autocad document (.dwg). I thanks you anyway Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.