ReMark Posted February 25, 2016 Share Posted February 25, 2016 (edited) I suspect it has something to do with the 3 duplicate objects and 9 overlapping objects I found in your drawing when I ran the OVERKILL command. I was able to trim lines in two corners and had to clean up then fillet another. Otherwise I had no problems with your drawing. I do however have a couple of questions though. Are you a student? Why is the counter height set at 15" above the floor? Are you selling to midgets or small children? Why would you locate a counter directly behind the place where payments (cash, etc.) are excepted? You are just begging for someone to rob you. BTW...I also ran the -PURGE command (using options Regapps and All) as well as the AUDIT command. I have a suggestion too. Do not put most everything on layer 0 then start overriding the color. Make better use of layers and assign unique colors to each so recognizing different parts of the drawing is easier. For example, I would have a layer for the walls, one for display cases and furniture, and another layer for text. If you are going to be adding dimensions I would have a separate layer for that too. Question: What is the "POP renderred gate" you call out in the drawing and why did you use so many very little polyline segments to indicate its location? I would have used the REVCLOUD command to highlight the area and adjust the arc radius to something larger. Have you taken an AutoCAD course? Hint: Use the LEADER or MULTILEADER command rather than making an arrow using three separate line segments. Much more efficient method. Hint: Set color 'By Layer' and not 'By Block'. Hint: Set and use OSnaps. Edited February 25, 2016 by ReMark Quote Link to comment Share on other sites More sharing options...
RobDraw Posted February 25, 2016 Share Posted February 25, 2016 That kind of critiquing should probably be preceded by some sort of spoiler alert. Quote Link to comment Share on other sites More sharing options...
ReMark Posted February 25, 2016 Share Posted February 25, 2016 (edited) If you think I went overboard go read my response to the latest request for help re: Penn-Foster Oleson Village project. On second thought don't bother. I struck all my commentary as it was just a means to vent. I'm better now that I have had my sixth cup of coffee. Edited February 25, 2016 by ReMark Quote Link to comment Share on other sites More sharing options...
RobDraw Posted February 25, 2016 Share Posted February 25, 2016 I stay away from that forum. You would think someone would have fixed that course by now. Quote Link to comment Share on other sites More sharing options...
ReMark Posted February 25, 2016 Share Posted February 25, 2016 anup: I had something along these lines in mind. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.