ASH_CAD Posted January 10, 2013 Posted January 10, 2013 Anyone Received a plan from Architect. The building plan has been drawn according to North, etc. When I try and draw a rectangle, for example, the rectangle is angled according to North and not vertical and horizontal in the MS. How do I turn this off. I tried changing VPORT to 0,0 and it rotated the whole drawing with North at the top. John Quote
ASH_CAD Posted January 10, 2013 Author Posted January 10, 2013 Organic Thanks but didn't seem to change anything. Quote
ASH_CAD Posted January 12, 2013 Author Posted January 12, 2013 Bigal That rotated the plan of the building and the cursor changed to left - right, up - down. What I wanted was simply to have building left - right, up - down and cursor left - right, up - down. Sorry if this is a poor explanation, I'm still learning. Quote
eldon Posted January 12, 2013 Posted January 12, 2013 It is very difficult to diagnose the problem without actually having the drawing to work on. But another guess, is Snapang set to zero? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.