JamFam Posted January 28, 2013 Posted January 28, 2013 Hi everyone. I'm looking for a 2D DWG of fluorescent light fixtures. End views and side views if you please. These light fixtures would be the recessed kind, 2 and 4 light tube sizes. If you can help or direct me to a site that has reliable and trustworthy CAD images please add the link. I've been to many sights looking for these illusive images with no joy, so if you can help I would appreciate it. Thanks Quote
ReMark Posted January 28, 2013 Posted January 28, 2013 (edited) I would try over at the CAD Block Exchange Network or the CADforum. Other options are try through AutoDesk Seek or visit the website of a manufacturer. One last option is a CAD symbol library (both 2D and 3D). http://www.cadcells.com/3d_electrical.htm Edited January 28, 2013 by ReMark Quote
RobDraw Posted January 28, 2013 Posted January 28, 2013 Not sure how you were searching, but a lot of manufacturers have CAD drawings for their fixtures. Quote
AONE_LED Posted 11 minutes ago Posted 11 minutes ago Standard recessed fluorescent symbols are easy to draw yourself and then turn into blocks. In plan, a 2-lamp 2x4 (typically 600x1200 mm or 2'-0" x 4'-0") is a rectangle of those exact dimensions with a single diagonal, or two short lines for the lamps; a 2x2 (600x600 mm) uses a square and one diagonal. Put them on a dedicated lighting layer, insertion point at the centre so they sit cleanly on a ceiling grid. For the end and side views you asked for, draw a shallow housing (about 100-150 mm high) with two or four lamp circles or rectangles inside, and a small junction-box or ballast housing at one end if you need it. Make one block per type (2-lamp and 4-lamp) with a type attribute so you can schedule them later. Draw everything at 1:1 in model space. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.