JamFam Posted January 28, 2013 Posted January 28, 2013 Hi everyone. I'm looking for a 2D DWG of fluorescent light fixtures. End views and side views if you please. These light fixtures would be the recessed kind, 2 and 4 light tube sizes. If you can help or direct me to a site that has reliable and trustworthy CAD images please add the link. I've been to many sights looking for these illusive images with no joy, so if you can help I would appreciate it. Thanks Quote
ReMark Posted January 28, 2013 Posted January 28, 2013 (edited) I would try over at the CAD Block Exchange Network or the CADforum. Other options are try through AutoDesk Seek or visit the website of a manufacturer. One last option is a CAD symbol library (both 2D and 3D). http://www.cadcells.com/3d_electrical.htm Edited January 28, 2013 by ReMark Quote
RobDraw Posted January 28, 2013 Posted January 28, 2013 Not sure how you were searching, but a lot of manufacturers have CAD drawings for their fixtures. Quote
AONE_LED Posted 2 hours ago Posted 2 hours ago Standard recessed fluorescent symbols are easy to draw yourself and then turn into blocks. In plan, a 2-lamp 2x4 (typically 600x1200 mm or 2'-0" x 4'-0") is a rectangle of those exact dimensions with a single diagonal, or two short lines for the lamps; a 2x2 (600x600 mm) uses a square and one diagonal. Put them on a dedicated lighting layer, insertion point at the centre so they sit cleanly on a ceiling grid. For the end and side views you asked for, draw a shallow housing (about 100-150 mm high) with two or four lamp circles or rectangles inside, and a small junction-box or ballast housing at one end if you need it. Make one block per type (2-lamp and 4-lamp) with a type attribute so you can schedule them later. Draw everything at 1:1 in model space. Quote
indiancad Posted 14 minutes ago Posted 14 minutes ago Try CAD Forum, CADblocksfree, or Zumtobel’s CAD library for fluorescent light fixture DWG blocks. Check the manufacturer drawings for accurate 2-lamp and 4-lamp fixture dimensions, including side and end views. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.