ALUX Posted July 1, 2013 Share Posted July 1, 2013 (edited) So I have this drawing that I am trying to convert into 3D with the given dimensions. It seems like an easy part to make but I am not sure how to make this part. Maybe I am overthinking this. Here's the drawing. Edited July 1, 2013 by ALUX Quote Link to comment Share on other sites More sharing options...
ReMark Posted July 1, 2013 Share Posted July 1, 2013 What's it supposed to be? Quote Link to comment Share on other sites More sharing options...
ALUX Posted July 1, 2013 Author Share Posted July 1, 2013 Sorry, I forgot to mention that. It's supposed to be a Top Panel cover hoist. Quote Link to comment Share on other sites More sharing options...
ReMark Posted July 1, 2013 Share Posted July 1, 2013 So it's basically a sheet metal part? Quote Link to comment Share on other sites More sharing options...
ALUX Posted July 1, 2013 Author Share Posted July 1, 2013 Correct, 16 GA. Quote Link to comment Share on other sites More sharing options...
ReMark Posted July 1, 2013 Share Posted July 1, 2013 And this cover comes to a slight peak in the center? It's not flat in other words. Quote Link to comment Share on other sites More sharing options...
ALUX Posted July 1, 2013 Author Share Posted July 1, 2013 (edited) And this cover comes to a slight peak in the center? It's not flat in other words. That's what I am thinking. This other drawing call it out better. What throws me off is the 1" borders? Edited July 1, 2013 by ALUX Quote Link to comment Share on other sites More sharing options...
ReMark Posted July 1, 2013 Share Posted July 1, 2013 OK...my original thought was the 1" border as you call it would be a flange that mates up with another flanged section and it might all be secured with sheet metal screws. Quote Link to comment Share on other sites More sharing options...
ALUX Posted July 1, 2013 Author Share Posted July 1, 2013 If it's not to much to ask, can you draw it out in autocad to give me a better idea on how to do the rest? Quote Link to comment Share on other sites More sharing options...
ReMark Posted July 1, 2013 Share Posted July 1, 2013 Do you have a sectional view through the cover by any chance? I'd like to see the stiffener. Quote Link to comment Share on other sites More sharing options...
ReMark Posted July 1, 2013 Share Posted July 1, 2013 I don't work in sheet metal. This is my interpretation of what I would call a flat "frame top" cover. Top view is to the left. Underside is to the right. The two stiffeners would go to the inside corner of the mating piece. Think of the cover as a lid on a shoe box. The one inch "border" would sit on a mating flange. Quote Link to comment Share on other sites More sharing options...
ReMark Posted July 2, 2013 Share Posted July 2, 2013 ALUX: Have you made any further progress or did you already give up? Quote Link to comment Share on other sites More sharing options...
JD Mather Posted July 2, 2013 Share Posted July 2, 2013 ...Here's the drawing. How come I don't see anything? No image, no url, no linked file? Quote Link to comment Share on other sites More sharing options...
ReMark Posted July 2, 2013 Share Posted July 2, 2013 That's weird. The OP actually had two images posted yesterday now there seems to be none. I wonder why he removed them? Quote Link to comment Share on other sites More sharing options...
ReMark Posted July 2, 2013 Share Posted July 2, 2013 I believe this is a fair representation of the first image the OP posted yesterday. There were no other views or sections. Quote Link to comment Share on other sites More sharing options...
ReMark Posted July 2, 2013 Share Posted July 2, 2013 And this is what the second image looked like as best as I can recall. Note that the side view indicates a sloped top. BTW...both images had the following words on the inside of the frame: X Stiffener Break. Quote Link to comment Share on other sites More sharing options...
JD Mather Posted July 2, 2013 Share Posted July 2, 2013 I think you interpreted the "x stiffener break as multiple parts. In sheet metal HVAC ductwork there is a slight "x-pucker" put on large flat panels (or even small panels) to give them a bit of strength an prevent "warbling" sound as air passes through. If you thing about it or if you can get access to an HVAC duct, it you will recognize the x feature. And then there is a flange around the perimeter for attachment to other pieces. Autodesk Inventor has tools for depicting the x-break and creating the flanges. In AutoCAD I would Loft the rectangle to a point creating the x-break feature and then Presspull the rectangle to add a "box" to the loft for the flanges. Finally, I would add some fillets for the bends and then Shell to the sheet metal thickness removing the bottom face of the "box". Quote Link to comment Share on other sites More sharing options...
ReMark Posted July 2, 2013 Share Posted July 2, 2013 Thanks for the explanation as I have no knowledge of HVAC ductwork to speak of although I think I did guess well when it came to the flange. Since the OP is using plain AutoCAD and not Inventor he'll have a little more work to do then. I got the feeling the OP is somewhat of a novice when it comes to 3D. Quote Link to comment Share on other sites More sharing options...
neophoible Posted July 2, 2013 Share Posted July 2, 2013 That's weird. The OP actually had two images posted yesterday now there seems to be none. I wonder why he removed them?Yes, that's weird. It looked to me like he blanked a bit of one of the images as well. I got the feeling the OP is somewhat of a novice when it comes to 3D.Or a student? Quote Link to comment Share on other sites More sharing options...
ReMark Posted July 3, 2013 Share Posted July 3, 2013 I think ALUX gave up and at this very moment is considering a career change. Perhaps an accountant? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.