Jump to content

Recommended Posts

donaldo

I have drafted a drawing using different line types for Utilities. For Example, Elec Cable Dashed and Tele Comm Dashed etc. However, in Layout Mode they are just shown as solid lines and defeats the purpose of having differentiated them. Please advise. :?

Share this post


Link to post
Share on other sites
ReMark

It's common for this to happen.

 

Set MSLTSCALE = 1.

Set PSLTSCALE = 1.

Set LTSCALE to either 0.5 or 1.

Share this post


Link to post
Share on other sites
donaldo

Thanks Re Mark - that may be useful for other lines but I have realised my mistake. I had them all under one layer and had just changed the line types. Once I gave each utility a separate layer the lines appear fine in Layout. I dont understand why Model lets you do this when Layout wont display it!

Share this post


Link to post
Share on other sites
RobDraw

But it does with the correct settings. Changing the linetypes by layer or by object should yield the same results unless you are changing the linetype by viewport. Then it wouldn't show in model space or other viewports.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...