Pahkina Posted December 6, 2008 Author Posted December 6, 2008 argh i cant do it :S :/ im bad at this... only things i know was when they taught me in the school.... can i add autocad like "language pakkages ? whit diffrent text styles.. like in paint ? what, i dont even know myself what i am talking about, must be the hangover... Quote
Cad64 Posted December 6, 2008 Posted December 6, 2008 What happens when you type STYLE at the command line? Does the dialog open or does Autocad give you a message? There is also a "Styles" toolbar that gives you easy access to your text styles, dimension styles and table styles. Check out this tutorial: http://www.we-r-here.com/cad/tutorials/level_2/2-6.htm In the image below, you can see the what I did. Quote
Pahkina Posted December 6, 2008 Author Posted December 6, 2008 That, my friend. Is HOT ! too bad just i dont think we have small enought "miller / to make those all lines to show up, i think ill do it whit V "blade. about 0.5mm deep . maybe enought, maybe not : Quote
Pahkina Posted December 6, 2008 Author Posted December 6, 2008 ok now , because i added little something it wont fit to this thread, i make new thread just now. any place where i should put "Rate my drawing"? Quote
Cad64 Posted December 7, 2008 Posted December 7, 2008 ok now , because i added little something it wont fit to this thread, i make new thread just now. any place where i should put "Rate my drawing"? If you want people to see your work and give you advice on how make it better, post it in the Showcase section: http://www.cadtutor.net/forum/forumdisplay.php?f=15 Quote
Tankman Posted December 7, 2008 Posted December 7, 2008 Im going to run it whit Woodwop in school and then make the runs for it ... then teh 1337 cnc runs throught MDF newest, took me half hour or something its 2000.dwg now i think lol. :> hope everyone can see them, RAte aswell please. Looks nice, I think? Say high to Woodwop! Quote
Tankman Posted December 7, 2008 Posted December 7, 2008 That, my friend. Is HOT !too bad just i dont think we have small enought "miller / to make those all lines to show up, i think ill do it whit V "blade. about 0.5mm deep . maybe enought, maybe not : Cad64's rendition is puuuuuuuuurrrrrrrffffffect! Perhaps run some cuts with your smaller V blade. Change cutting tool between passes? Be sure not to remove the material from the milling table while changing tools to keep the original alignment. Quote
Pahkina Posted December 7, 2008 Author Posted December 7, 2008 Cad64's rendition is puuuuuuuuurrrrrrrffffffect! Perhaps run some cuts with your smaller V blade. Change cutting tool between passes? Be sure not to remove the material from the milling table while changing tools to keep the original alignment. i wont remove it b4 its ready... woodwop takes time to make all those :S damn it has something like 100+ commands it must do lol : oh and our school's cnc aint bad, it has like 14 slots its not cheap one. we have 4 and 5 axis cncs:O Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.