Jump to content
TCH

CNC Tool - Solid to sections with automatique xy increment.

Recommended Posts

TCH

Hi.

 

I want to create sections in a solid.

These sections pass through planes xy which are incremented by a value to set (Z = 0.05 ... ), and the beginning and the end of the planes must be set too ( Z = 0 to Z = 123 ...). Regions generated would be converted to polylines (open at one end (N, S, E , W) ) shifted inward or outward 1x by an indicated value ( Offset = 3 ...).

Each section as well created would be converted into block *.dxf appointed by the drawing name - value of the plan Z. This macro serve to generate a G-code (clean) almost directly usable by a CNC control software (with a post traitment with ACE converter).

The interest to create different "block" is to have the choice to enter different block of programmation in the CNC software.

Merci pour tout éventuel renseignement.:D

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...