Jump to content

Plotting - Grey prints as purple.


Recommended Posts

Wallisthfc

Hi

 

I am currently using Autocad 2015 LT in as a freelance in someones office. We tend to hatch our building outlines in grey solid but when we print the grey comes out as purple.

 

I've been inside the network settings and adjust all sensible options but unfortunately it is still coming out as purple.

 

I assume that the issue is with the plotting settings from the workstation but have limited fire fighting experience with plotting.

 

Please help!

 

Plotter is a Cannon IP760, i have plotted the same drawing from several workstations and altered the screening/ pen styles and in a different version of AutoCAD (2010) which leads me to think the issue is applied to the layout of the drawing of the plotter setting on the network.

 

 

Any suggestions would be gratefully received

Link to post
Share on other sites

Did you check the plot style that you are using to see if the normal grey color was overridden? What plot style is being used? Ex. - acad.ctb

Link to post
Share on other sites
Wallisthfc

Ive tried None, acad.cbt, 100% screening, 25% screening.

 

i will try to see if it is overwritten now. fingers crossed.

Link to post
Share on other sites

We have a Canon iPF760. I'd be willing to do a test print if you don't mind sharing the drawing. Don't need the whole drawing just enough to troubleshoot the problem. I assume you really do want this plotted in color is that correct?

Link to post
Share on other sites
Wallisthfc

perfect. how do i send you the file? here is my email

 

Yes it will print in colour but unfortunately the grey is upside down

Edited by Wallisthfc
Link to post
Share on other sites

All we are interested in is getting the grey to plot in the correct color. It could be upside down and backwards for that matter.

 

I just sent you an email. When it arrives you might want to edit out your email address in the above post.

 

Update: Turns out the solid hatch used in the plan views was on a different layer and assigned a different shade of grey than that used in the elevation views. OP said he knew how to fix the problem.

Edited by ReMark
Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...