_axel_ Posted March 2, 2016 Share Posted March 2, 2016 Dear community and forum. I am by no means a 3d expert nor professional, so I humbly ask for your help. To make a long story very short, I have generated a hull (from PolyCAD, www.polycad.co.uk ), or a boat, into a 3d solid. This far everything is fine and dandy, the problem arises when I want to make the boat hallow, so that it can be filled with stuff. My idea is that I want to make a boat that can carry a raspberry, a sonar and some other stuff. The problem I run into is that there seems to be something broken in the 3d solid, and the auto-heal function can't fix it. I have tried with different tolerances and different methods of fixing it, but it will not work. And since I am new to this I can't even find where the h*ll the error in the modell is. Please please help me, the ipt-file is in the link below. https://drive.google.com/file/d/0B9HKDAIbUvklbXpJYW9qZnZheUU/view?usp=sharing Best regards /Anders - DIY is more fun - Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.