Lippens Infra Posted January 5, 2021 Share Posted January 5, 2021 Hello, By lack of plans, it has fallen upon me to design the slope of a parking lot. They HAVE to use water-permeable asphalt. The owner doesn't believe it will last and therefore he wants all water to evacutate towards 2 points. The area is 1.500m². The points are on the outside of the parking lot. Towards one point, we are allowed to use some kind of gutter. In the DWG the 3 buildings are red, the black lines are fixed in height, the green ones are not. The "gutter" is pink. the two points where all the water needs to flow towards are apointed with circles. These points are already the lowest points by nature. Is there a tool or trick to make slopes towards those points or do i need to calculate the slopes manually and use some trial and error? Thanks in advance! design parking lot.dwg Quote Link to comment Share on other sites More sharing options...
BIGAL Posted January 6, 2021 Share Posted January 6, 2021 This is a Civil design question and there are multiple ways of solving it, if your struggling now I think you need to seek help from another more experienced staff member. The simplest way to work out all the levels is to make a 3d plane surface that has the correct directional slope. You drape your design over this surface getting levels from the surface. The surface only needs 4 points. This is built into some civil software like CIV3d and Civil Site Design. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.