Jump to content

How to snap texts in title block


Recommended Posts

It appears that all the texts have been inserted the same distance away from the centre point of the cell. Measure how far that is for one of the texts, and then move all the texts to the left. I reckon the distance is 0.1549 but you can check measure that yourself.

Link to post
Share on other sites

Looks like someone changed the justification for them in the Properties Palette instead of using JUSTIFYTEXT.

Change Text Justification Without Moving the Text Position with JUSTIFYTEXT: https://knowledge.autodesk.com/support/autocad/learn-explore/caas/sfdcarticles/sfdcarticles/Change-Text-Justification-Without-Moving-the-Text-Position-with-JUSTIFYTEXT.html

Link to post
Share on other sites

In your case it looks like "MIDDLE RIGHT"  justify was how the block was originally set up.  Someone then changed the justification to "MIDDLE CENTER" - throwing off all the text placement.

 

If you want to fix it all at once, just select all the text in the block, go into the properties window and change the justification back to "MIDDLE RIGHT" and it will recenter all at one time.

 

If you want to keep the justification "MIDDLE CENTER", like you have it in the drawing, you would just need to use a move command and move all of the MTEXT's over to the left slightly.

 

-ChriS

Edited by ammobake
Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...