Stephen Shafer Posted April 5, 2009 Author Share Posted April 5, 2009 everything is local Quote Link to comment Share on other sites More sharing options...
nocturne00 Posted April 5, 2009 Share Posted April 5, 2009 Just a hunch, but perhaps your RAM cant handle it, or is falling short. a 4GB RAM on a 32bit winxp only reads about 3.6-3.7GB total physical memory, minus all operating files on the processes seen in the task manager, including memory taken by acad 2009 or microstation w/c requires a lot of memory when a file is running,,, especially a 50MB file(w/c is a very large file, coz i limit my file sizes only up to 10MB then try to break it down). Just to check, while doing your conversion try to check your task manager under performance>memory. if its falling above 100%, expect it to crash. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.