ucs and drawing problem

[LIU]

hi to all ,

i created a 100 ft wide rectangle,

and applied zoom extents,

saved and closed drawing.

when i reopened drawing , 

green line was not collinear to y-axis.

zoom previous did not worked.

any solution to that ?

 

Edited yesterday at 01:01 PM by LIU

[SLW210]

What's the "green line"?

 

Hard to tell anything from an image.

 

Please explain better or post the .dwg.

[Paul Li]

See if it makes a difference if you completely docked the command prompt instead of having it floating at the bottom 

[LIU]

green line is line of y-axis of ucs ,

it is not a separate object.

 

i have to bring this view in a form as that of new drawing, where green line ( of ucs )

 

is normal,

 

 

[LIU]

 

that is green line ,

after zoom Extents application , this shows away from ucs  ( y-axis ).

what to do to solve it ?

[Paul Li]

Looks like your 1st dwg might not be in plan and 2d wire view.

Try this sequence of command:

_.VSCURRENT

2

_.Plan

_W

[BIGAL]

Maybe this UCSORG set origin point to say a object point. UCSICON ON will display corner icon for current UCS.