alanjt Posted April 28, 2010 Share Posted April 28, 2010 So I am not sure what the point of it is. This annoyed me and led me to make my comment about you having a horrible way of asking for help. From the start I've only tried to help. Well, you don't have to help me man, I am just trying to learn. This was just uncalled for and what caused my response. I know I don't have to help. I don't have to help anyone, but I do it because I like to and it's good programming exercise. I had no attitude, I never said you get paid to do this, and I never offered you any money. where did this come from? These are all thoughts that come from your sick head. I would be willing to bet that you are Bi-Polar. This and the preceding post are just completely uncalled for. You went to far. However, you did, it's over and done and I've completely forgotten it. I worked with you and gave you a solution to your problem. On my end it works just ask you described you wanted it to. Surprising as it may be, I hold no ill will towards you, and will leave it at that. Happy CAD'ing and I'm sure we'll bump into each other on the forum again. Quote Link to comment Share on other sites More sharing options...
ReMark Posted April 28, 2010 Share Posted April 28, 2010 All's well that end well then. At least I hope so. Cheers! Quote Link to comment Share on other sites More sharing options...
alanjt Posted April 28, 2010 Share Posted April 28, 2010 All's well that end well then. At least I hope so. Cheers! Ditto.............. Quote Link to comment Share on other sites More sharing options...
TimZilla Posted April 29, 2010 Author Share Posted April 29, 2010 Quote Link to comment Share on other sites More sharing options...
ReMark Posted April 29, 2010 Share Posted April 29, 2010 Ladies and gentlemen. I do believe we have a peace treaty. Thank you. Quote Link to comment Share on other sites More sharing options...
alanjt Posted April 29, 2010 Share Posted April 29, 2010 Ladies and gentlemen. I do believe we have a peace treaty. Thank you. Until next time...:wink: Quote Link to comment Share on other sites More sharing options...
ReMark Posted April 29, 2010 Share Posted April 29, 2010 There will be peace in the valley...someday... Quote Link to comment Share on other sites More sharing options...
kuknisti Posted January 5, 2011 Share Posted January 5, 2011 SOLUTION I USE IS THIS: 1.EXPORT DWG FILE AS DGN FILE,which is the microstation drawing format 2.attach the DGN file as an external reference. 3.after attach when you select the dgn file , there will appear the dgn options, select "snap off" if you dont want to snap dgn reference file. with this method you can use another file as an underlay to draw another thing.You cant see the dgn layer in your layer list. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.