glazier Posted January 8, 2006 Posted January 8, 2006 I have just began a career doing shop drawings in the glazing industry, does anyone know where i can find the basic architectural symbols. Quote
Lazer Posted January 8, 2006 Posted January 8, 2006 This has loads of symbols http://www.caddons.com/Architectural_symbols.htm But you have to pay for it. Quote
glazier Posted January 8, 2006 Author Posted January 8, 2006 Thanks for the link but what what im looking for is achitectural legends, Thnaks for the reply Quote
siderus Posted January 17, 2006 Posted January 17, 2006 When you start recieving Archetectural drawings from the Engineers. you will be able to cut and paste them off of there drawings. I do shop drawings for HVAC and I try to use the original drawinf whenever possible to save time. Quote
CadBrat Posted August 6, 2008 Posted August 6, 2008 howdy. me Again. Oi. now I'm looking for a few arch symbols. really, all i need are some bushes, maybe a couple of trees. you'd think that blocks of really basic stuff like this would be easily available from aCAD, but i haven't found any yet. thanks again. -Michael Quote
filan1a Posted August 8, 2008 Posted August 8, 2008 howdy. me Again. Oi. now I'm looking for a few arch symbols. really, all i need are some bushes, maybe a couple of trees. you'd think that blocks of really basic stuff like this would be easily available from aCAD, but i haven't found any yet. thanks again. -Michael Hey CadBrat You can have them in "tool palettes" type: ToolPalettes at the comand line or in "design center" type: adcenter at the comand line Quote
filan1a Posted August 8, 2008 Posted August 8, 2008 Try also this http://cben.net/ This site also has tons of blocks for free You dont need to buy them, as they are shared for free by uploaders. Hope it hepls A Quote
mrbucket Posted August 8, 2008 Posted August 8, 2008 Try also this [http://cben.net/] This site also has tons of blocks for free You dont need to buy them, as they are shared for free by uploaders. Hope it hepls A Dead link. Quote
CadBrat Posted August 8, 2008 Posted August 8, 2008 your Escape key is worn out!? sounds like a digital existentialist crisis. bummer, dude. well, thx. much for the good suggestions. i will check those out. also found a couple things here @ http://www.cadtutor.net/download/ but not much. ended up creating my own, but i'm sure i'll need these in the future. good luck w/ your escape, Mr. Bucket. Quote
mrbucket Posted August 9, 2008 Posted August 9, 2008 your Escape key is worn out!? sounds like a digital existentialist crisis. bummer, dude. well, thx. much for the good suggestions. i will check those out. also found a couple things here @ http://www.cadtutor.net/download/ but not much. ended up creating my own, but i'm sure i'll need these in the future. good luck w/ your escape, Mr. Bucket. lol, well thank you! Quote
filan1a Posted August 11, 2008 Posted August 11, 2008 Dead link. I have edited the link http://cben.net/ thanks mrbucket Quote
ReMark Posted August 11, 2008 Posted August 11, 2008 CadBrat: Take a look at this re: CAD blocks of trees and bushes. It's a very good site and all the blocks are free. http://www.draftsperson.net/index.php?title=Draftsperson.net:Free_AutoCAD_Blocks Quote
CadBrat Posted August 11, 2008 Posted August 11, 2008 Thanks much all. I'm sure these links will prove helpful to other beginners as well. - Michael Quote
mrbucket Posted August 12, 2008 Posted August 12, 2008 I have edited the linkhttp://cben.net/ thanks mrbucket Nice site, Alot of things to use, and add to my library! Thanks! Quote
filan1a Posted August 12, 2008 Posted August 12, 2008 Nice site, Alot of things to use, and add to my library! Thanks! Welcome! I use it too. And i suggest uploading to it. Bye. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.