ReMark Posted February 16, 2018 Posted February 16, 2018 For simplicity's sake I usually loft pitches individually so that if I need to make a change everything isn't one big single solid model. Quote
OMEGA-ThundeR Posted February 20, 2018 Posted February 20, 2018 Regular lines work just as fine (since you only need the 2 sloped side lines to make a single roof pitch with LOFT). I use 3D on a montly basis, but the LOFT command was not know by me. This thread made me aware (used extrude 99/100 times), and opens up a world of new possibilities . Quote
ReMark Posted February 20, 2018 Posted February 20, 2018 Yes, you can loft lines but the result will be a surface not a solid. To achieve a solid one would have to then use the Thicken command. Quote
f700es Posted February 20, 2018 Posted February 20, 2018 Well you can tell the Loft to be a solid in the mode options (2018). I would honestly use something else for this task, maybe something like BricsCAD Shape. It reads/writes DWG files. Might be worth a shot and it only costs you some time as it is free. I would use SketchUp myself. If you have a full copy of AutoCAD you can install AutoDesk's free SKP import utility and make your model in SketchUp Make 2017 and then import the SKP into AutoCAD. Now the model will be surfaces and NOT a 3D solid, if that makes a difference. Quote
ReMark Posted February 20, 2018 Posted February 20, 2018 f700es: I'm not sure I agree with you. If you were to loft two lines, even with the mode option set to solid, the result would still be a surface. Quote
f700es Posted February 20, 2018 Posted February 20, 2018 f700es: I'm not sure I agree with you. If you were to loft two lines, even with the mode option set to solid, the result would still be a surface. Already did before I posted....... not lines but shapes. Perhaps that's the difference then. Edit: Perhaps that's my error in my approach to this. I would not use lines but shapes to construct the roof as I would try to solve this in a non AutoCAD way. Quote
ReMark Posted February 20, 2018 Posted February 20, 2018 On that point, shapes, we are in agreement as long as they are closed polylines. Quote
f700es Posted February 20, 2018 Posted February 20, 2018 On that point, shapes, we are in agreement as long as they are closed polylines. +1 on the closed plines! Quote
BIGAL Posted February 21, 2018 Posted February 21, 2018 My $0.05 PFACE ! can have as many points a you like it makes a planar surface so hide, render etc will recognise it. Very suitable for roofs with valleys etc. The code is copyrighted. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.