Jump to content
jrn

metric output in mm unit drawing

Recommended Posts

jrn

Hello

 

I'm trying to make an ATTDEF (in combination with a circle/reference object) to show coordinates in meters, even though the drawing units are in mm.

The general drawing units may not be changed.

I want the output to be 7,453 rather than 7453.

Yes, with comma and three decimals...

 

But how ?

 

Please help, Thank you.

Sorry for my english

Share this post


Link to post
Share on other sites
dbroada

If you are using a field in your display you should be able to apply a formula (/1000) to get the magnitude corrct but I think you will have problems with the comma. When I last tried to default the decimal point to a comma lots of odd things happened so I went back to using the . symbol. There are a few other europeans on here so maybe one of them will know how to get the comma.

Share this post


Link to post
Share on other sites
jrn

Thank you.

 

When selecting a single polyline, I can choose Elevation for property - and here, the Conversion factor is editable, but no matter what placement along the Z-axis the block have, the output is 0.

When selecting a single line, I can choose Delta, uncheck X and Y, but here the Conversion factor are set to 1 and greyed out / not editable.

Same when selection a circle, and I choose Center for the property, the Conversion factor is greyed out.

 

I have been messing around and tried to apply a formula to the field, but cant get any other output than ####

 

It seems strange to me, that such a simple task should be such a hassle.:cry:

Share this post


Link to post
Share on other sites
dbroada

for an ATTDEF to work it must be included in a block. Have you done this? If so, can you post the block. A block is worth 1000 words.

Share this post


Link to post
Share on other sites
jrn

Yes, the ATTDEF is included in the block with the circle/line/polyline.

 

I can't get it to work.

If anyone knows how, please let me know.

Share this post


Link to post
Share on other sites
dbroada

I can only repeat what I said above, attach the block and someone will look at it for you

Share this post


Link to post
Share on other sites
dbroada

OK, try this......

 

Open up your field definition and copy what you already have in the "Field Expression" panel. Select "Formula" instead of object and paste the expression you have just copied. You can now apply your /1000 to convert from m to mm.

 

I had this working for all but the Kote_X block. I will leave you to sort out the presicion and comma (I see have have done it in one :) ).

 

Note that you need to REGEN after changing the Z value to see the changes.

 

edit - dwg added

 

four%20blocks_testing%20Z-values[1].dwg

Share this post


Link to post
Share on other sites
jrn

Now it nworks! Thank you

 

I've attached my blocks for anyone to use.

One where it possible to write, what the height refers to and one just with the height.

Both for tagging heights in meters, with three decimals (precision in mm).

 

You might want to rename them altitude or height?

 

Best wishes

KOTE_AT.dwg

KOTE.dwg

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...